OceanBase UPDATE

描述

该语句用于修改表中的字段值。

格式

UPDATE [IGNORE] table_references
    SET update_asgn_list
    [WHERE where_condition] 
    [ORDER BY order_list]
    [LIMIT row_count];

table_references:
    tbl_name [PARTITION (partition_name,...)] [, ...]

update_asgn_list:
    column_name = expr [, ...]

order_list: 
    column_name [ASC|DESC] [, column_name [ASC|DESC]…]

参数解释

参数

描述

IGNORE

在 INSERT 语句执行过程中发生的错误将会被忽略。

table_references

指定修改表名,多表修改时,表名直接‘,’作为间隔。

where_condition

指定过滤条件。

row_count

限制的行数。

tbl_name

插入表名。

partition_name

插入表指定的分区名。

column_name

列名。

column_name ASC

按列名升序修改。

column_name DESC

按列名降序修改。

注意事项

不管是多表还是单表更新都不支持直接对子查询进行更新值操作,例如:​update (select * from t1) set c1 = 100;

示例

  1. 创建示例表 t1 和 t2。
  2. OceanBase(admin@test)>create table t1(c1 int primary key, c2 int);
    Query OK, 0 rows affected (0.16 sec)
    OceanBase(admin@test)>select * from t1;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  1 |    1 |
    |  2 |    2 |
    |  3 |    3 |
    |  4 |    4 |
    +----+------+
    4 rows in set (0.06 sec)
    
    OceanBase(admin@test)>create table t2(c1 int primary key, c2 int) partition by key(c1) partitions 4;
    Query OK, 0 rows affected (0.19 sec)
    OceanBase(admin@test)>select * from t2;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  5 |    5 |
    |  1 |    1 |
    |  2 |    2 |
    |  3 |    3 |
    +----+------+
    4 rows in set (0.02 sec)
  3. 将表 t1 中 “t1.c1=1” 对应的那一行数据的 c2 列值修改为 100。
  4. OceanBase(admin@test)>update t1 set t1.c2 = 100 where t1.c1 = 1;
    Query OK, 1 row affected (0.02 sec)
    Rows matched: 1  Changed: 1  Warnings: 0
    
    OceanBase(admin@test)>select * from t1;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  1 |  100 |
    |  2 |    2 |
    |  3 |    3 |
    |  4 |    4 |
    +----+------+
    4 rows in set (0.01 sec)
  5. 将表 t1 中按照 c2 列排序的前两行数据的 c2 列值修改为 100。
  6. OceanBase(admin@test)>update t1 set t1.c2 = 100 order by c2 limit 2;
    Query OK, 2 rows affected (0.02 sec)
    Rows matched: 2  Changed: 2  Warnings: 0
    
    OceanBase(admin@test)>select * from t1;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  1 |  100 |
    |  2 |  100 |
    |  3 |    3 |
    |  4 |    4 |
    +----+------+
    4 rows in set (0.01 sec)
    
  7. 将表 t2 中 p2 分区的数据中 “t2.c1 > 2” 的对应行数据的 c2 列值修改为 100。
  8. OceanBase(admin@test)>update t2 partition(p2) set t2.c2 = 100 where t2.c1 > 2;
    Query OK, 1 row affected (0.02 sec)
    Rows matched: 1  Changed: 1  Warnings: 0
    
    OceanBase(admin@test)>select * from t2;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  5 |    5 |
    |  1 |    1 |
    |  2 |    2 |
    |  3 |  100 |
    +----+------+
    4 rows in set (0.06 sec)
  9. 修改多个表。将 t1 表和 t2 表中满足 “t1.c1 = t2.c1” 对应行的数据 t1 表中的 c2 列值修改为 100,t2 表中的 c2 列值修改为 200。
  10. OceanBase(admin@test)>update t1,t2 set t1.c2 = 100, t2.c2 = 200 where t1.c2 = t2.c2;
    Query OK, 6 rows affected (0.03 sec)
    Rows matched: 6  Changed: 6  Warnings: 0
    
    OceanBase(admin@test)>select * from t1;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  1 |  100 |
    |  2 |  100 |
    |  3 |  100 |
    |  4 |    4 |
    +----+------+
    4 rows in set (0.00 sec)
    
    OceanBase(admin@test)>select * from t2;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  5 |    5 |
    |  1 |  200 |
    |  2 |  200 |
    |  3 |  200 |
    +----+------+
    4 rows in set (0.01 sec)
    
  11. 修改多个表。修改 t1 表和 t2 表的p2分区中满足 “t1.c1 = t2.c1” 对应行的数据 t1 表中的 c2 列值修改为 100,t2 表中的 c2 列值修改为 200。
  12. OceanBase(admin@test)>update t1,t2 partition(p2) set t1.c2 = 100, t2.c2 = 200 where t1.c2 = t2.c2;
    Query OK, 6 rows affected (0.02 sec)
    Rows matched: 6  Changed: 6  Warnings: 0
    
    OceanBase(admin@test)>select * from t1;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  1 |  100 |
    |  2 |  100 |
    |  3 |  100 |
    |  4 |    4 |
    +----+------+
    4 rows in set (0.01 sec)
    
    OceanBase(admin@test)>select * from t2;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  5 |    5 |
    |  1 |  200 |
    |  2 |  200 |
    |  3 |  200 |
    +----+------+
    4 rows in set (0.01 sec)
    
  13. 对可更新视图 v 进行更新值。
  14. OceanBase(admin@test)>create view v as select * from t1;
    Query OK, 0 rows affected (0.07 sec)
    
    OceanBase(admin@test)>update v set v.c2 = 100 where v.c1 = 1;
    Query OK, 1 row affected (0.02 sec)
    Rows matched: 1  Changed: 1  Warnings: 0
    
    OceanBase(admin@test)>select * from v;
    +----+------+
    | c1 | c2   |
    +----+------+
    |  1 |  100 |
    |  2 |    2 |
    |  3 |    3 |
    |  4 |    4 |
    +----+------+
    4 rows in set (0.01 sec)

作者:andy,如若转载,请注明出处:https://www.web176.com/oceanbase/26441.html

(0)
打赏 支付宝 支付宝 微信 微信
andy的头像andy
上一篇 2023年10月14日
下一篇 2023年10月14日

相关推荐

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注